Sign in | Join Now | Sitemap Inquiry Basket(0)
logo
Home > News

Aluminum sawing work safety rules [2015-08-03]

Ingots must be cut card prison. When sawing aluminum ingots , aluminum mold design and production process saw the trip can not go too fast , ingot temperature should not be too high. The location should be correct lubricant poured continuously .
 
When the blade is not completely stopped , prohibited to clean aluminum scrap . Ingots amputated short head of not less than 20 mm , should be promptly removed after stopping the saw .
 
When the blade is returned in situ before renewal aluminum ingots, aluminum ingots to prevent blade strike . Continued ingot ingot staff shall be placed below.
Can Saw Miter Saw steel ?
 
Need to re- buy a saw, because with a saw blade saw over in aluminum , then there will be a lot of flash after aluminum steel, sharp blade nor the original so .
 
Saw aluminum machine cut iron blade can change it?
 
Yes, but rarely is a laser cutting machine, most or traditional . Suitable for cutting all kinds of copper, copper alloy , iron , stainless steel, seamless steel , aluminum extrusion die design training provided aluminum and other metal pipe bar . 1, there are semi-automatic , manual feeding, automatic clip feeding, automatic cutting . Can be used for straight cutting 90 ° , 90 ° -30 ° left to the miter , 90 ° -45 ° to the right miter . 2 , there are automatic type by programmable PLC program settings , automatic feeding .

Contact us

Click here to enter your email message